See how to install crimp sleeves properly CLICK HERE
Item # Description Qty Price
Item # C12 For 14 gauge wire 100 $7.00
Item # C23 For 12.5 gauge wire 100 $12.00
Item # C2L Long Crimp for 12.5 gauge wire 100 $18.00
Item # C34 For 10 gauge or 14 gauge barbed 50 $13.00
Item # C45 For 9 gauge or 12.5 gauge barbed 50 $16.00
Note: Use the corresponding crimp slots in your tool. (i.e.: For a C23 crimp sleeve use the 2-3 slot in the tool. For the CT4 taps use the 3-4 slot in your tool.) Refer to "The Fence Post" section for an illustration on the proper way to install your crimp in the tool.
______________________________________________________________________________
Open Taps are for Electrical Connections only. They are aluminum and are not for splicing as a strength connection.. Use the 3-4 slot in your crimp tool. Recommended for all of your electrical connections and jumper wires for permanent installation. Very useful to have these in your tool box to install jumpers etc, after you have terminated the wire. If you want the option to remove this later, then consider the SBLT below.
Item # CT4 Open tap crimp $.025 each
Item # CT4-100 Bottle of 100 $24.00
____________________________________________________________________________
SPLIT BOLT LINE TAPS are used for electrical connections where you may not want it to be permanent. They are made of zinc and can be removed at a later date. Do not overtighten these as with the split bolt you can break them if overtightened. (Repeat: DO NOT OVERTIGHTEN SPLIT BOLTS - TIGHTEN FOR A SNUG ELECTRICAL CONNECTION ONLY.)
We now have two varieties of split bolts. The SBLT-10 is the original one that we have sold in the past. They are fairly heavy duty and seem to be stronger. The SBLT-20 is a new offering for us. They are not as strong as the orginal one, but we have had people wanting a more economical one. So here it is.
Item #SBLT-10 (box of 10) $ 8.50
Item # SBLT-20 (bottle of 20) $ 13.00 (NEW) These are an econo model and I would recommend tightening them up finger tight plus a quarter turn or less and avoid overtightening. These will make a good electrical connection and work fine if you dont overtighten them.
__________________________________________________
The Twist Link or Wrap Connector is a pre-formed spirelled hi-tensile wire that has grit glued onto the inside curves. It works well on wrap around insulators and in-line connections. You can use two for an in line wire splice. They are removable with no tools and can be re-used.
Photo above is of a Twist Link used with a wrap-a-round insulator on a corner post.
Item # CWC $0.50 each.
_________________________________________
We stock 1-3/4" double Barbed Staples that have a class III coating. Also shown is a unique Staple Driver. Its a handy little gadget that helps you start a staple in hard woods. It also helps start it straight! Staples are Item # BS175 $1.35 per pound. They also come in a 40 # pail, but we will package them by the pound for you. The Staple driver is Item # KSD $11.00 each.
_________________________________________________________
The only product that Joins AND Tensions wire. We have so much to say about Gripples and what they can do for you on your fencing project that we have given them their own page on our website. Read more on the next page.
Click here to return to Product Index
