All Products

Threaded Reducer Bushing 1 1/4 - Threaded bushings can be added to any female fitting to reduce the size of the line.

The Philmac 1-1/4" x 1" Reducing Coupler is used when you are going from one size HDPE pipe to another smaller size HDPE pipe, it is compression fi...

Philmac Shut Off Valve ~ 3/4" The Philmac Shut Off tee valves are used when you need to stop water flow using HDPE pipe.  There are compression fit...

Philmac Shut Off Valve ~ 1" The Philmac Shut Off tee valves are used when you need to stop water flow using HDPE pipe.  There are compression fitte...

This item my require additional delivery time. The Philmac Female Adapters are used when you are going from HDPE pipe to Standard Thread pipe, it i...

                   Cyclops 30 Joule BOSS Energizer                 Cyclops Fence Chargers will complete your Electric Fence Strongest Line, Built ...

Fence Charger Lightning Diverter

Retaining Spring Clips for the HTGR Assembly (Break Keeper), is universal it fits both the O'Briens Geared Reel and the Twin Hook Geared Reel. 

K71-02 ~ Knipex Comfort Grip Bolt Cutters Micro-structured cutting edges allow easy cutting of large cross-sections Gripping surface below the join...

Philmac Female Elbow ~ 1 1/2" The Philmac Female Elbows are used when you are going from HDPE pipe to Standard Thread pipe, it is compression fitte...

EZ Pull Tool is a 4 in 1 tool that crimps the 2-3 sleeves, cuts wire, pulls staples and strips coated wire. It’s an all-around tool when working wi...

Cyclops CHAMP 5 Joule AC Energizer  A popular and powerful energizer at 5 output joules of power. A low impedance, 5 Joule, Electric Fence Charger....

The Philmac Female Adapters are used when you are going from HDPE pipe to Standard Thread pipe, it is compression fitted on one end standard pipe o...

Advantage Feeder Mineral Attachment 3x feeding areas 4x reinforcing sections from front to back 2x over-centre latches fasten the roof UV stable m...

Philmac Joint Kit 3/4" The Philmac Joint Kit is replacement kit which comes with: 1 ~ O-ring, 1 ~ Collet, & 1 ~ Nut. These are Outside Diamete...

Threaded Reducing bushing allow you to adapt down to a smaller size female thread.  

Philmac Standard Tee~  2 This item my require additional delivery time The Philmac Standard Tee is used when you are going from HDPE pipe to HDPE p...

Philmac Female Tee 2" This item may require additional time for delivery.  The Philmac Female Tee's are used when you are going from HDPE pipe to t...

The Philmac Male Adapters are used when you are going from HDPE pipe to Standard Thread pipe, it is compression fitted on one end standard pipe on ...

Philmac Standard Elbow ~ 1 1/2" The Philmac Standard Elbows are used when you are going from HDPE pipe to HDPE pipe, it is compression fitted both ...

The Philmac Male Adapters are used when you are going from HDPE pipe to Standard Thread pipe, it is compression fitted on one end standard pipe on ...

Philmac Joint Kit ~ 1 1/4" The Philmac Joint Kit is replacement kit which comes with: 1 ~ O-ring, 1 ~ Collet, & 1 ~ Nut. These are Outside Dia...

Zarbea 15 Joule It is AC-powered, low-impedance, 15-joule output at 75 ohms; 20 stored joules, 115 volt, and 60-cycle, pulsed output (1-second inte...

The Philmac Shut Off Tee Valves are used when you need to stop water flow using HDPE pipe.  There are compression fitted on both ends. This versati...