Check the estimated time of arrival for your order.
Usually ships in 1-2 business days
Polyethylene HDPE Water Pipe (SDR 11 200 PSI) - 500' Coils
Check the estimated time of arrival for your order.
Usually ships in 1-2 business days
Shipping: Ships to all 48 contiguous US states. Freight cost is calculated at checkout — enter your shipping ZIP to see the exact total before you order. Transit time is typically 3–5 business days. Questions? Contact us.
Need specs? See our HDPE pipe technical reference — SDR ratings, IPS-OD vs. CTS-OD sizing, ASTM/AWWA standards, and installation guidance.
Polyethylene HDPE Water Pipe – SDR 11, 200 PSI | Built to Last Underground
When you're laying water line across a pasture, you need pipe that can handle pressure, resist the elements, and keep flowing for decades. The Polyethylene HDPE Water Pipe in SDR 11, 200 PSI is exactly that — a high-density polyethylene pipe built for underground water line installations on farms, ranches, and rural properties.
Rated at 200 PSI with an SDR 11 wall thickness, this pipe is engineered to handle the demands of agricultural water systems. HDPE is naturally resistant to corrosion, chemicals, and UV degradation, making it the go-to choice for buried water lines that need to perform year after year without maintenance headaches. The 500-foot coil gives you plenty of pipe to cover large pastures or multiple water points in a single order.
Flexible enough to handle ground movement and temperature changes, yet strong enough to hold pressure under load, HDPE pipe is the standard for a reason. Whether you're building a new water system from scratch or replacing aging galvanized or PVC lines, this is the pipe that gets the job done right.
Pipe Specifications — SDR 11, 200 PSI IPS-OD (All Sizes)
| Size | OD | Wall Thickness | ID | Pressure Rating | Coil Length |
|---|---|---|---|---|---|
| 3/4" | 1.050" | 0.095" | 0.860" | 200 PSI @ 73°F | 500 ft |
| 1" | 1.315" | 0.120" | 1.075" | 200 PSI @ 73°F | 500 ft |
| 1-1/4" | 1.660" | 0.151" | 1.358" | 200 PSI @ 73°F | 500 ft |
| 1-1/2" | 1.900" | 0.173" | 1.554" | 200 PSI @ 73°F | 500 ft |
| 2" | 2.375" | 0.216" | 1.943" | 200 PSI @ 73°F | 500 ft |
Flow Rate Reference
| Pipe Size | @ 2 ft/sec (GPM) | @ 4 ft/sec (GPM) | @ 6 ft/sec (GPM) | Typical Use |
|---|---|---|---|---|
| 3/4" | ~3 GPM | ~6 GPM | ~9 GPM | Single trough or tank supply |
| 1" | ~5 GPM | ~10 GPM | ~15 GPM | Small pasture lateral lines |
| 1-1/4" | ~8 GPM | ~16 GPM | ~24 GPM | Multi-trough lateral distribution |
| 1-1/2" | ~10 GPM | ~20 GPM | ~30 GPM | Sub-main or high-demand lateral |
| 2" | ~15 GPM | ~30 GPM | ~45 GPM | Main distribution line |
Compatible Fittings — Philmac Compression IPS-OD (Products We Carry)
We sell and recommend Philmac Compression Fittings (IPS-OD) for use with this SDR 11 IPS-OD pipe. These tool-free compression fittings provide secure, leak-free connections without insert stiffeners.
| Fitting | Project Use |
|---|---|
| Philmac Coupling IPS-OD | Joining two pipe runs end-to-end; extending mainline across long distances |
| Philmac Repair Coupling (No Stop) IPS-OD | In-line repairs on existing pipe runs without cutting out a section |
| Philmac Reducing Coupling IPS-OD | Stepping down pipe size from mainline to lateral or distribution lines |
| Philmac Standard Elbow IPS-OD | 90° direction changes around terrain, buildings, or obstacles |
| Philmac Female Elbow IPS-OD | 90° direction change with female thread outlet for connecting valves or risers |
| Philmac Standard Tee IPS-OD | Splitting mainline into two equal branch runs; feeding multiple zones or tanks |
| Philmac Female Tee IPS-OD | Branching off mainline with a female thread outlet for valves, hydrants, or meters |
| Philmac Reducing Standard Tee IPS-OD | Tapping a smaller lateral line off the mainline without reducing main flow |
| Philmac Male Adapter IPS-OD | Connecting HDPE pipe to female-threaded pumps, valves, pressure tanks, or equipment |
| Philmac Female Adapter IPS-OD | Connecting HDPE pipe to male-threaded equipment, filter housings, or hydrants |
| Philmac End Cap IPS-OD | Terminating a pipe run; pressure testing a line before final connection |
| Philmac Shut Off Ball Valve Tee Handle IPS-OD | Isolation and shutoff points along mainline or at zone entries |
| Philmac Joint Kit IPS-OD | Replacement nut and grab ring for remaking or servicing existing Philmac connections |
| Philmac PVC Grip Ring IPS-OD | Replacement grip ring for securing pipe in compression fitting body |
Common Applications
- Main Water Lines — Primary distribution from well, pump, or municipal source across ranch or farm
- Lateral Distribution Lines — Running water from mainline to individual troughs, tanks, and hydrants
- Pump-Fed Irrigation Systems — Pressure-rated for pump-fed agricultural irrigation
- Stock Tank Supply Lines — Long runs to remote water tanks and troughs
- Rural Water Distribution — Multi-property or subdivision water system laterals
Lay it once, forget about it — HDPE pipe is the underground water line solution built to outlast everything else on your farm.
Frequently bought Together
Jobe Megaflow Water Valve - 1" Short Tail
Jobe Megaflow Water Valve – 1" Short Tail | High-Flow Tro...
Jobe Megaflow Water Valve - 3/4" Long Tail
Jobe Megaflow Water Valve – 3/4" Long Tail | Automatic Tr...
Riser Valve for Quick Coupler - Powerflex
Riser Valve for Quick Coupler – Powerflex | Extend Your Q...
Philmac Shut Off Ball Valve Tee Handle IPS-OD
Philmac Shut Off Ball Valve with Tee Handle – IPS-OD | In...
Riser Valve for Quick Coupler - Powerflex
Riser Valve for Quick Coupler – Powerflex | Extend Your Q...
Jobe Megaflow Water Valve - 3/4" Long Tail
Jobe Megaflow Water Valve – 3/4" Long Tail | Automatic Tr...
Jobe Megaflow Water Valve - 1" Short Tail
Jobe Megaflow Water Valve – 1" Short Tail | High-Flow Tro...
Jobe Megaflow Water Valve - 1" Long Tail
Jobe Megaflow Water Valve – 1" Long Tail | High-Flow, Ext...
Philmac Brass Water Trough Valve – 3/4"
Brass Durability for Reliable Automatic Trough Filling — ...
