Check the estimated time of arrival for your order.
Usually ships in 1-2 business days
Strainrite FX2 Contractor Chain Strainer — Fixed Handle
Check the estimated time of arrival for your order.
Usually ships in 1-2 business days
The Strainrite FX2 Contractor Chain Strainer is the fixed-handle model in Strainrite's wire tensioning range, built around a solid one-piece 22mm (7/8") handle. It's deliberately slimmer than the 27mm Standard model — sized for frequent contractor use, where the tool is in your hand all day rather than now and then. It ships ready to work, with the 1.2m (47") chain and grab assembly and the spring kit already installed.
Underneath the size difference it's the same proven NZ-made chain strainer: heat-treated Spheroidal Graphite cast iron claws and grips, wear-resistant smooth-grip jaws that hold all common sizes of fence wire while minimising damage to the strand, and gold zinc plating throughout. It's the strainer contractors reach for in competitive fencing.
Features
Solid One-Piece 22mm (7/8") Handle: Slimmer than the 27mm Standard handle — smaller in the hand, ideal for frequent and contractor use.
Spring Kit Installed: Guides the claws across the chain as you strain — fitted as standard on the FX2 (an optional extra on the Standard model).
SG Cast Iron Claws and Grips: Heat-treated Spheroidal Graphite cast iron for a long service life.
Wear-Resistant Smooth Grip Jaws: Hold all common sizes of fence wire while minimising wire damage.
Improved Casting Design: Computer-designed geometry for effective grip on zinc and aluminium-coated fencing wire.
Gold Zinc Plating Throughout: Increased corrosion protection across handle, chain and fittings, with heavy-duty rivets and a tested 1.2m chain with swivel.
Specifications
| Brand | Strainrite |
| Handle | Solid one-piece, 22mm (7/8") diameter, fixed |
| Claws & Grips | Heat-treated Spheroidal Graphite cast iron |
| Jaws | Wear-resistant smooth grip |
| Chain | 1.2m (47") gold passivated chain and grab assembly with swivel, heavy-duty rivets |
| Spring Kit | Included, installed |
| Finish | Gold zinc plated and passivated |
| Wire Compatibility | All common fence wire sizes |
| Made In | New Zealand |
| Range | Wire Tensioning — Chain Strainers |
⚠️ The chain and grab assembly is not designed to form a slip loop around a post.
Browse all fencing tools at Tools and Hardware. Prefer a heavier handle? See the Strainrite Standard Chain Strainer.
Smaller in the hand, one piece through the handle — the FX2 is the chain strainer built for fencers straining wire all day.
Frequently bought Together
Strainrite Quik-End Clip – Netting End Tie, 100 Pack
The Strainrite Quik-End Clip is a pre-formed wire clip wi...
Fence Tightener - EZ Daisy w\/Clip
Tension Your Fence Wire Without Cutting It — EZ Daisy On-...
Powerflex Strainer with End Strain Insulator
Terminate and Tension Your Fence Wire in One Assembly — P...
Tension Handle for Daisy Style Tightener
Wind Up the Slack on Your Daisy Tensioner — Tension Handl...
Handle for Inline Style Tightener
The Right Tool for Tightening Donald-Style Inline Tension...
Gallagher High Strain Insulator Kit
Powerflex now carries Gallagher High Strain Insulator Kit...
Strainrite Durashield Quick Loop Insulated Strainer
The Durashield Quick Loop — An Insulated Strain That Wrap...
Strainrite Hi-Test Insul-Strainer
Tension and Insulate in One — The Insul-Strainer Built fo...
Strainrite Standard Chain Strainer
Tension Hi-Tensile Wire Properly — The Chain Strainer Bui...
Donalds Type Galvanized Tightener
Tension and Maintain Hi-Tensile Fence Wire — Donalds Type...
20' Long Chain Stretcher Bar Puller
Long Chain Stretcher Bar Puller Stretcher Bar Puller acco...
FenceGard Fence Chain Grab Tightener
The Chain Grab Wire Puller can be used to take the slack ...
Gallagher Insulated Wire Strainer Kit (with Ratchet Tightener)
Gallagher Insulated Wire Strainer Kit (with Ratchet Tight...
